Mega Gold
- The Mega Gold device is a Sensory system Gold Detector contains four detecting programs for rough gold, gold treasures, silver, and diamonds, it is a German device that has won the admiration and appreciation of many users as it has proved its effectiveness with all merit.
- The Mega Gold 2019 Device Features:
- The Mega Detection German factories have developed the new Mega Gold device, adding new features to be the most suitable for prospectors and treasure hunters to detect gold, gold treasures, old coins, statues, etc.
- Thanks to the long-range sensor system, now the user of the device can explore treasures and minerals for underground depths up to 30 meters And a front search range up to 2000 meters on the ground surface
- The Search Systems of the new version of the MEGA Gold 2019:
- The Mega Gold Device operates by the sensor system through 4 pre-programmed detecting programs to detect gold, buried gold treasures, silver, and diamonds.
- To use the sensor system, the device has to be installed as the following:
- The antennas had to be connected to the main unit of the device. And the user has to open the antennas to the maximum possible length.
- The antenna balance can be adjusted from the head of the antenna by rotating it from left to right until it gets the same height between the two antennas
- Then the user had to start the antennas operating through the operation button after selecting the language.
- Then he has to select a searching system from the screen.
- The sensor system in the Mega Gold device has four search programs which are:
- The buried Gold detection program
- The raw Gold detection Program
- The Silver detection program
- The Diamond detection program
- Controlling the target with a square selection style:
- This method enables the user to locate the target accurately and gives him a better ability to verify the target’s validity.
- The box around the target can be completed with a distance of 200 cm from the center of the target when the user is in the same line with the target and the antennas turn to target.
- The goal of all four aspects is otherwise that there is a possibility that the goal is not real
- A Very important note:
- When using the device to search for the following objectives: Diamonds, precious stones, and platinum
- The deep master unit should be planted into the ground and operated in any nearby random place to make sure that the targets are searched properly and effectively
- Measuring the target depth:
- At the highest point of the goal enter the nails or the pegs from the depth measuring unit about 8 cm in the ground then Adjust the exact frequency on five then Choose the program of the target from the main unit
- Wait three to four minutes Stand on the target and monitor the antennas which are turning to one side and that will be the first point of the signal,
- After moving from the target point you will notice that the antennas will gradually move forward.
- Then Stop when the antennas turn back on one side and that will be the second point of the signal,
- The approximate depth of the target is the distance between the two signal points
- And then at a distance of 45 degrees from the second signal point. The user had to conduct several measurements for measuring the depth more accurately
- the digital voltmeter on the Deep master will show the electrical voltage of the battery and you will hear an increase in the sound vibrations directly.
- In this system, if the user holds the device in a tilted and not vertical way, he may get the wrong result. Therefore, the sensor should be kept vertically at 90 ° angle.
- The User can increase or decrease the magnetic sensitivity according to the terrain conditions using the left and right arrows, and he could also control the speaker’s volume through the button on the speaker cable
Available languages
- Languages available in the device are:Â German, English, Russian, French, Spanish, Persian, Turkish, and Arabic
Reviews
There are no reviews yet.